Products

Accessories

From holding your sample to applying the load, build the setup suited to your test.

All Accessories (160)

Lab Modules (8)

Load Cells (17)

Manual Positioners (6)

Raw Material (1)

Replacement Parts (10)

Sample Holders (23)

Service and Training (9)

Stage Improvements (7)

Testing Chambers (8)

Find an accessory

Product MA740
Sample Holder and Chamber, Flat with Wall (D = 37 mm) for MA626
Product MA626
Chamber (D=98 mm), 2 Walls (50.8 and 76.2 mm) for Sample Holders
Product MA096
Sample Holder, Torsion of Rodent Bone
Product MA646
Sample Holder, 6-Screw (D = 63.5 mm) with Cone-Ended Screws for MA626
Product MA098
Sample Holder, 4 Point Bending Top Fixture
Product MA097
Sample Holder, 3 Point Bending Fixture
Product MA297
Single-Axis Load Cell (250 N) with amplification module
Product MA679
Indenter, Spherical (D=6.35 mm)
Product MA262
Indenter, Flat (D = 12.5 mm)
Product MA296
Single-Axis Load Cell (100 N) with amplification module
Product MA410
Single-Axis Load Cell (10 N) with amplification module
Product MA999
Single-Axis Load Cell (1.5 N) with amplification module
Product MA090
Sample Holder, Tensile Grip (2 Sets) with Sample-Mounting Plate
Product MA610
Sample Holder, Flat with Screw Clearances (D = 85 mm) - for MA626
Product MA555
Multi-Well Plate Holder
Product MA412
Single-Axis Load Cell (0.25 N) with amplification module
Product MA670
Quick Connection Adapter (incl. 3 Dowel Pin (D = 3.2 mm))
Product MA413
Single-Axis Load Cell (0.1 N) with amplification module
Product MA765
XY Positioner (100 mm) with Manual Adjustment Screws
Product MA236
Multiple-Axis Load Cell (250 N, 3 Nm) with amplification module
Product MA242
Multiple-Axis Load Cell (250 N, 10 Nm) with amplification module
Product MA089
Sample Holder, C-Shaped Tensile Grip (Opening=10 mm)
Product MA232
Multiple-Axis Load Cell (17 and 70 N) with Two Amplification Modules
Product MA563
Sample Holder, C-Shaped Tensile Grip (Opening=13 mm)
Product MA087
Additional Textured Pads for Tensile Grip MA089
Product MA235
Multiple-Axis Load Cell (70 N) with amplification module
Product MA234
Multiple-Axis Load Cell (35 N) with amplification module
Product MA334
Die Cutter, ASTM D638-14 V
Product MA233
Multiple-Axis Load Cell (17 N) with amplification module
Product MA175
Resolution Improved to 0.1 um on a Stage
Product MA690
Kit of Needles with Holder
Product SW326 v4.4.0.15
Mach-1 Motion
Product MA240
Additional Calibration (70 N) and amplification module for a Multiple-Axis Load Cell
Product MA721
Mach-1 Motion Software - Add-On for Mutiple-Axis Load Cell
Product MA722
Mach-1 Motion Software - Add-On for Analog Inputs
Product MA239
Additional Calibration (17 N) and amplification module for the Multiple-Axis Load Cell
Product MA723
Mach-1 Motion Software - Add-On for Camera Feed
Product MA724
Mach-1 Motion Software - Add-On for Normal Indentation
Product MA084
Sample Holder, Puncture Fixtures
Product MA070
5-Channel Electromechanical Testing Chamber
Product MA775
Angular Positioner (Tilt: ±25°, Rotation: 360°) Manual
Product SW186 v4.1.0.19
Mach-1 Analysis
Product MA767
XY Positioner (50 mm) with Manual Vernier Micrometers
Product MA763
X Positioner (50 mm) with Manual Vernier Micrometer
Product MA761
X Positioner (50 mm) with Manual Adjustment Screw
Product MA684
Indenter, Vickers (Indentation depth = 20um)
Product MA683
Indenter, Berkovich (Max Indentation Depth = 40um)
Product MA725
Mach-1 Analysis Software - Add-On for Indentation Testing (Elastic Model)
Product MA726
Mach-1 Analysis Software - Add-On for Unconfined & Confined Compression (Poroelastic)
Product MA468
Indenter, Flat (D=12 mm, M3 Male, SS316L)
Product MA467
Indenter, Flat (D=10 mm, M3 Male, SS316L)
Product MA085
Sample Holder, Syringe Holder Kit
Product MA466
Indenter, Flat (D=8 mm, M3 Male, SS316L)
Product MA635
Chamber (60 mL) with 3 Portholes for Small Samples
Product MT337 v1.5.0.4
Mapping Toolbox
Product MA465
Indenter, Flat (D=5 mm, M3 Male, SS316L)
Product MA464
Indenter, Flat (D=4 mm, M3 Male, SS316L)
Product MA385
Thread Adapter, Female M3 to Male 6-32
Product MA463
Indenter, Flat (D=3 mm, M3 Male, SS316L)
Product MA386
Indenter, Flat (D = 30 mm)
Product MA882
Indenter, Flat (D=2 mm, Shaft D=1 mm, M3 Male, SS316L)
Product MA462
Indenter, Flat (D=2 mm, M3 Male, SS316L)
Product MA263
Indenter, Flat (D = 31.75 mm)
Product MA040
Kit of Flat Indenters
Product MA461
Indenter, Flat (D=1 mm, M3 Male, SS316L)
Product MA030
Kit of Spherical Indenters
Product MA093
Sample Holder, Kit of T-Shaped Tensile Fixtures (D=5, 10 and 15mm)
Product MA134
Lap Shear Test Fixtures
Product MA036
Spherical Indenter (D=2 mm)
Product MA044
Spherical Indenter (D=0.5mm, Brazed)
Product MA172
Travel Range Increased to 100 mm on a 50 mm Stage
Product MA347
Maintenance and Calibration Verification of the Mach-1
Product MA742
Confined Compression Chamber Kit, Dia 3mm
Product MA179
Travel Range Increased to 250 mm on a Stage
Product MA178
Travel Range Increased to 200 mm on a Stage
Product MA177
Travel Range Increased to 150 mm on a Stage
Product MA446
Configuration of Mach-1 Computer System, Remote Assisted Installation, Troubleshooting and Support
Product MA071
Sample Holder, In-vivo Axial Loading Fixtures for the Mouse Tibia
Product MA073
Sample Holder, In Vivo Fixtures for Non-Invasive ACL Rupture in the Rat
Product MA588
Testing Chamber 109.5mm with Heater and Controller
Product MA633
Emergency Stop Button
Product MA038
Spherical Indenter (D=5 mm)
Product MA035
Spherical Indenter (D=1 mm)
Product MA043
Spherical Indenter (D=0.3mm, Brazed)
Product MA744
Confined Compression Chamber Kit, Dia 6mm
Product MA072
Sample Holder, In-vivo Axial Loading Fixtures for the Rat Tibia
Product MA068
Sample Holder, Tensile Grips with Electrodes
Product MA080
Sample Holder, Osteochondral Core - for MA626
Product MA034
Spherical Indenter (D=0.5 mm)
Product MA695
Sample Holder, Probe Tack (D = 5 mm) and Loop Tack
Product MA092
Sample Holder, T-shaped Tensile Fixtures (D=0.8 mm)
Product MA499
Sample Holder, Drill Chuck
Product MA337
Calibration Weight approx. 500g
Product MA033
Spherical Indenter (D=0.3 mm)
Product MA336
Calibration Weight approx. 100g
Product MA338
Calibration Weight approx. 6.5g
Product MA185
Additional Wall for Testing Chamber MA626 or MA588 – Square, 625 mL, H=100 mm
Product MA183
Additional Wall for Testing Chamber MA626 or MA588 – Rectangular, 250 mL, H=65 mm
Product MA184
Additional Wall for Testing Chamber MA740 – Square, 50 mL, H=50 mm
Product MA037
Spherical Indenter (D=3 mm)
Product MA032
Spherical Indenter (D=0.2 mm)
Product MA186
Mach-1 Motion Software - Add-On for Impedance Measurement
Product MA031
Holder for Spherical Indenters
Product MA180
High Torque Capacity (15N-m) on Rotation Stage
Product MA863
Kit of Molds for Hydrogel Samples
Product MA333
Dogbone Sample Cutting Die
Product MA299
Laboratory Material for Mechanical Testing
Product MA674
Indenter, Conical (R = 25um, A = 60deg)
Product MA864
Kit of Samples for Training
Product MA715
Bronze Level - Yearly Plan for Support, Service, Maintenance and Training
Product MA716
Silver Level - Yearly Plan for Support, Service, Maintenance and Training
Product MA717
Gold Level - Yearly Plan for Support, Service, Maintenance and Training
Product MA634
Glue Loctite 4013 Prism
Product MA000
Customized Item
Product MA012
Mechanical Tester Upgrade Mach-1 V500c to V500cs
Product MA300
Lab Module - Unconfined Compression of Hydrogel Disks
Product MA014
Mechanical Tester Upgrade Mach-1 V500c to V500ct
Product MA301
Lab Module - Tension and Rupture of Skin
Product MA015
Mechanical Tester Upgrade Mach-1 V500c to V500css
Product MA302
Lab Module - Bending of Bone
Product MA303
Lab Module - Torsion of Bone
Product MA847
Remote training for new users
Product MA304
Lab Module - Torsion of Disk-Shaped Sample
Product MA849
3-Day Training at Biomomentum
Product MA305
Lab Module - Digital Image Correlation - Shear Modulus of a Hybrid Hydrogel
Product MA850
1-Day Additional On-Site Training
Product MA306
Lab Module - Digital Image Correlation - Mode I Edge Crack Testing
Product MA848
1-Day On-site Training
Product MA852
Scientific assistance on study protocol or new methods (per hour)
Product MA675
Spacing Rod 50 mm, SS316
Product MA022
Mechanical Tester Upgrade Mach-1 V500ct to V500cst
Product MA023
Mechanical Tester Upgrade Mach-1 v500ct to v500csst
Product MA025
Mechanical Tester Upgrade Mach-1 V500cst to V500csst
Product MA024
Mechanical Tester Upgrade Mach-1 V500css to V500csst
Product MA020
Mechanical Tester Upgrade Mach-1 V500cs to V500cst
Product MA021
Mechanical Tester Upgrade Mach-1 V500cs to V500csst
Product MA019
Mechanical Tester Upgrade Mach-1 V500cs to V500css
Product MA017
Mechanical Tester Upgrade Mach-1 V500c to V500cst
Product MA018
Mechanical Tester Upgrade Mach-1 V500c to V500csst
Product MA176
Travel Range decreased to 50 mm on a Stage
Product MA444
Computer Upgrade
Product MA731
Microscope Lens (8X)
Product MA730
Macro Zoom (10X) Lens with Stand and Lighting
Product MA445
Mach-1 Computer System Replacement
Product MA602
Extended Warranty, Year 5
Product MA601
Extended Warranty, Year 4
Product MA600
Extended Warranty, Year 3
Product MA703
Replacement Part, Single-Axis Load Cell (250 N)
Product MA702
Replacement Part, Single-Axis Load Cell (100 N)
Product MA701
Replacement Part, Single-Axis Load Cell (10 N)
Product MA700
Replacement Part, Single-Axis Load Cell (1.5 N)
Product MA708
Replacement Part, Multiple-Axis Load Cell (70 N)
Product MA707
Replacement Part, Multiple-Axis Load Cell (35 N)
Product MA705
Replacement Part, Multiple-Axis Load Cell (250 N)
Product MA706
Replacement Part, Multiple-Axis Load Cell (17 N)
Product MA709
Recalibration, Multiple-Axis Load Cell (Functional)
Product MA732
Color Camera (1.3MPx) with Lens (12.5mm), LED Light and Support
Product MA733
Rails and Light Kit for Camera
Product MA736
Mono Camera (5Mpx) with Two Lenses (12mm and 1.0-3.0X Telecentric), LED Light and Support
Product MA766
XY Positioner (50-100 mm) with Manual Vernier Micrometers

160 / 160

Need Help Choosing an Accessory?

Talk to our team