Aller au contenu

Ultra-sensitive microfluidic wearable strain sensor for intraocular pressure monitoring

  • par garon@biomomentum.com

Sevda Agaoglu; Priscilla Diep; Matthew Martini; Samudhyatha KT; Murat Baday; I. Emre Araci
Lab Chip, 2018, .

https://doi.org/10.1039/C8LC00758F

93 citations · 20 en 2025–2026

Les titres, résumés et légendes des publications sont présentés en anglais.

Wearable technologies have potential to transform healthcare by providing continuous measurements of physiological parameters. Sensors that passively monitor physiological pressure without using electronic components are ideal for wearable contact lenses because they are easy to interface with the cornea and the external environment. Here, we report a passive integrated microfluidic sensor with a novel transduction mechanism that converts small strain changes into a large fluidic volume expansion, detectable by a smart-phone camera. The optimization of the sensor architecture and material properties results in a linear and stable sensor response. We have shown that the sensor has a detection limit of <0.06% for uniaxial and <0.004% for biaxial strain. We embedded our sensor in silicone contact lenses and measured the intraocular pressure induced strain in porcine eyes in the physiological range. The sensor's continuous operation capability for >19 hours and a lifetime reaching >7 months demonstrate its potential for long-term ophthalmic monitoring applications.

Utilisation des équipements

Le Mach-1 appliquait des cycles d’étirement uniaxial et de relâchement à des capteurs microfluidiques en NOA65 et Clearflex montés sur des films de PDMS. Les essais biaxiaux utilisaient une enceinte sous pression distincte.

Article et documents

Matériaux (1)

Configurations de test (1)

Découvrez la recherche en pratique

Découvrez les études de cas

Report a problem with this page

Your email is used only to follow up on this report.

Screenshots (optional)

Click this area and paste a screenshot, or drag files here. Up to 3 PNG, JPEG or WebP images; 5 MB per image. Hide confidential information first.

Please do not include passwords or customer information. Reports and screenshots are private.