(En anglais seulement) Adding two horizontal stages (X and Y axes) and a rotation stage (T) will allow a displacement of 100 mm at a 0.5 um resolution on one horizontal axis, a displacement of 50 mm at a 0.5 um resolution on the other horizontal axis and an infinite rotating displacement at a 0.1 mdeg resolution. This upgrade, including the multi-axial configuration, enables 3D indentation mapping, friction testing, shear testing and torsion testing. It is not necessary to ship back the whole original tester to Biomomentum. New parts will be shipped and a remote installation will be scheduled.
The csst model can be used with both uniaxial and multiaxial load cells. Multiple load cells can be installed at the same time and easily switched for a particular test. Here is a list of all uniaxial load cells with different ranges (e.g. +/- 0.5, 1.5, 10, 100 and 250 N). To measure the 6 components of the load (Fx, Fy, Fz, Tx, Ty and Tz), you need to buy a multiaxial load cell (ranges are either 17, 35 or 70N). To test both soft and hard materials, you will either need two multiaxial load cells (e.g. a 17 and a 70N) or one 70N and an additional calibration box (17N) for that same load cell.
- Design modulaire, ajustement facile pour chaque configuration de test.
- Compatible avec les cellules de charge multiaxiales
- Permet la réalisation de tests uniaxiaux de haute précision en compression, tension, cisaillement, indexation et torsion selon plusieurs modes de chargement: dynamique, statique et périodique.
