Biomechanical properties of the human superficial fascia: Site-specific variability and anisotropy of abdominal and thoracic regions

Superficial fascia is a fibrofatty tissue found throughout the body. Initially described in relation to hernias, it has only recently received attention from the scientific community due to new evidence on its role in force transmission and structural integrity of the body. Considering initial difficulties in its anatomical identification, to date, a characterization of the superficial fascia through mechanical tests is still lacking.

The mechanical properties of human superficial fasciae of abdominal and thoracic districts (back) of different subjects (n = 4) were then investigated, focusing on anisotropy and viscoelasticity. Experimental tests were performed on samples taken in two perpendicular directions according to body planes (cranio-caudal and latero-medial axes). Data collected from two different uniaxial tensile protocols, failure (i.e., ultimate tensile strength and strain at break, Young's modulus and toughness) and stress-relaxation (i.e., residual stress), were processed and then grouped for statistical analysis.

Failure tests confirmed tissue anisotropy, revealing the stiffer nature of the latero-medial direction compared to the cranio-caudal one, for both the districts (with a ratio of the respective Young's moduli close to 2). Furthermore, the thoracic region exhibited significantly greater strength and resultant Young's modulus compared to the abdomen (with greater results along the latero-medial direction, such as 6.13 ± 3.11 MPa versus 0.85 ± 0.39 MPa and 24.87 ± 15.23 MPa versus 3.19 ± 1.62 MPa, respectively). On the contrary, both regions displayed similar strain at break (varying between 38 and 47%), with no clear dependence from the loading directions. Stress-relaxation tests highlighted the viscous behavior of the superficial fascia, with no significant differences in the stress decay between directions and districts (35–38% of residual stress after 300 s).

All these collected results represent the starting point for a more in-depth knowledge of the mechanical characterization of the superficial fascia, which can have direct implications in the design, implementation, and effectiveness of site-specific treatments.

Keywords

Superficial fascia; Biomechanics; Experimental tests; Abdomen; Thorax