Test configurations
External Analog Sensors
It is possible to connect two external analog sensors (e.g. strain gauges (gages), electrodes, thermocouples, pressure sensors, etc.) to the tester electrical acquisition system. Acquisition of those channels will be synchronized with the other stages, load cell channels and data which will all be saved in the same results file.
Recommended tester (1)
Accessories (1)
FAQ
Is it possible to add analog inputs to the mechanical tester?
Two Analog Inputs (Software Add-On required) can be added to the mechanical tester (see attached image). Use the checkboxes to activate one or both analog inputs channels. For each channel the ground reference setting can be set to “Differential” or “Single-Ended” and the voltage range set to ±10V, ±5V, ±1V or ±0.2V. Signals shall be connected to the dedicated SCC-68 box that is provided to users with this software add-on. See the SCC-68 reference label inside the box and/or the SCC-68 user guide for the proper location of the inputs terminals.